EN. IT. FR . DE. ES

M44/700

Combination dough divider +
Dough rounder

WITH A TWO SPEED 1,5 HP MOTOR

  • It works automatically: you just need to place the fresh dough inside of the dough container and you get the dough portions out of the dough rounder
  • It works continuously without interruption as long as there is dough inside of the container (max. capacity: 44 litres)
  • The machine immediately stops when the upper or the front door is opened
  • The dough divider is completely built in stainless steel
  • Knife, sensor and dough support in teflon-coated stainless steel
  • Unbreakable
  • The dough rounder has the same characteristics as the single machine
  • A chute brings the portions from the dough divider into the dough rounder
  • Prepares portions weighing approx. 300 to 650 grams
  • On request, the adjustable cone of the model M44/300 can be mounted on this dough divider in order to get with the same machine portions weighing approx. 50 up to 300 grams: the working field in this case is approx. 50 to 650 grams.
  • Very compact and extremely strong
  • The dough portions come out perfectly round and closed

TECHNICAL DATA

Power 1650 W / 9,4 A
Current 230 V / 50 Hz (any other on request)
Net weight Kg. 185
Gross weight Kg. 200
Machine dimensions cm 82 x 74 x 100 h
Overall dimensions cm 91 x 81 x 117 h (m3 0,86)
Portion weight approx. 300÷650 gr.
Hourly production approx. 70÷400 Kg.
Tank capacity 44 lt.

Spare parts list

Rif. Description
022
EMERGENCY PUSHBUTTON
041
MAGNETIC DETECTOR
132
MOVABLE SECTOR
133
REGULATION FLANGE
135
FLANGED CONE
136
KNOB
601
FRAME
603
SIDE PANEL
604
REAR PANEL
605
PANEL WITH SLOTS
606
FRONT PANEL
607
PROTECTION PANEL
609
UPPER PANEL
610
COVER
611
FRONT DOOR
612
HINGES
613
MOTOR
614
GEARBOX
615
KNOB
616
BRIDGE
618
BUSHING
619
FLANGED COLLAR
620
SPIRAL
621
BUSHING
622
CENTRAL SHAFT
623
CONE
624
CAM FOR MICROSWITCH
625
KNIFE GEARBOX ROD
626
KNIFE GEARBOX
627
KNIFE MOTOR
628
KNIFE SUPPORT
629
CONNECTING ROD
630
DOUGH SUPPORT BLOCK
631
DOUGH SUPPORT BLOCK SHAFT
632
DOUGH SUPPORT BLOCK BEARER
633
DOUGH SUPPORT
634
KNOB
635
KNIFE
636
KNIFE KNOB
637
KNOB
638
REGULATION HANDLE
639
REGULATION SCREW
640
SCREW
641
MOVABLE HANDLE SUPPORT
642
REGULATION BUSHING
643
MULTIFUNCTION PUSHBUTTON
644
REMOTE CONTROL SWITCH
646
FEELER SUPPORT
647
FEELER HANDLE
648
FEELER HOLD
649
GEAR PIN
650
FEELER SUPPORT PIN
651
FEELER HANDLE PIN
652
FEELER PLATE
653
FEELER
837
MICROSWITCH
996
POWER SUPPLY CORD

Exploded view

Page under construction.
Please contact us:

info@friulcompany.com
Tel. +39 . 0427 731573 - 731574

Troubleshooting guide

1. The machine does not start:

  • Check that the doors ref.610 and 611 are correctly closed
  • Check that the emergency pushbutton is not pressed
  • Check that the grid ref.660 is correctly placed
  • Check that the dough rounder is correctly placed under the dough divider
  • Check that the dough rounder is duly plugged into the socket of the dough divider

2. The knife keeps on turning:

  • Check that the sensor ref.653 is perfectly clean